- Monitor - 6" carbon steel full flow
monitor complete with horizontal and vertical worm gear drive.
Positive stops for 25 degree elevation and proper horizontal swing
for safety.
- Nozzle - Magnum Model CR high performance foam
- water nozzle aluminum construction with option for use with foam
transfer controller system at 3%-6% foam proportioning.
- FOAM TRANSFER CONTROLLER - 2-1/2" Inlet
NST, 2-1/2" Discharge NST and 2" Foam Pickup Attachment.
FTC to be used in conjunction with the Cobra for furnishing the
needed foam solution for injection of 3% AFFF at 2000 gpm dis-
charge, 100 psi nozzle pressure. For 6% proportioning 2 FTC units
are required.
- FOAM PICKUP TUBE AND HOSE - Drum length pickup
tube complete with 10' x 2" foam suction hose for use when
taking foam suction from drums.
|
- TRAILER - Carbon steel construction with
checker plate deck, 2" ball type hitch, 3 stabilizer jacks
swing away type, 2 - rear retractable out-riggers to include soft
ground condition set peg for stabilization, 3500# suspension with
standard load tires and rims, tool box to be sized for storage of
FTC and jack stakes, inlet piping for foam transfer controller to
be 2-1 /2" NST; water inlet to be 2 - 5" stortz male
with full 6" monitor waterway. Lighting to meet dot
specifications.
- WELDING - All welding to be performed by
certified and/or coded A.S.M.E. welders.
- RANGE - Nozzle Pressure 100 psi. Water only 300
ft. Foam solution 300 ft.
- TEST CONDITIONS - NO wind factor
- VOLUME - 2,000 - 5,000 GPM Adjustable.
|
